How To Clean Toyota Softex
The interior of your vehicle is one of the most important parts, not only due to its influence on how you feel about your car, but also because it can sometimes be a source of allergens for those with sensitive skin or asthma.
The more frequently you wash and clean your vehicle’s interior, the better they will run and the less likely there will be health issues related to exposure. Health concerns include respiratory problems from excessive dust and allergy-triggering substances in the air, as well as skin irritations caused by soiled upholstery.
While it may seem difficult to find the time to do regular maintenance, this article has all the tips and tricks to help make it easy! These tips will cover everything form basic washing to replacing items like seat covers and using the correct cleaners. This way, you will never have to worry too much about keeping your vehicle clean.
Reminder: When cleaning vinyl such as the dashboard or door trims, use warm water and a soft brush or sponge to avoid scratching or breaking them. Make sure to work in an area that is free of dirt first before applying cleaner to prevent glue seepage.
Wipe down the windows
The next thing you will want to do is wipe down your vehicle’s windows. Make sure to use glass cleaning solution or paper towels to remove all of the dirt and grime that has built up over time.
Never use water to clean your car window because this may cause damage to the surface of the plastic. That would cost you money!
After wiping down each pane of glass, let it dry for a few minutes before getting in and moving around to prevent any wet spots from gathering dust. This also helps ensure that there are no streaks left behind.
Once everything has dried, you can then wash them with glass cleaner and warm water to restore their original luster. Make sure to work slowly so as not to break anything!
Clean the back seat area last to avoid spreading excess liquid onto the front seats and vice versa.
Wipe down the seats
After you have cleaned out all of the trash, your next step is cleaning the interior parts of your vehicle. Starting with the seat covers, pull them up and wipe them clean using either cloth or paper towels.
Next, check the foam pieces that go under the cushion. These can get dirty very quickly and contain allergens such as pollen and hair. You want to make sure these are completely wiped away!
Finally, take some time to look underneath the cushions. The back side of the seating surface will gather dust and crumbs so it is important to wash this area too.
Your new Softees will keep your car fresh and smelling nice for years after purchase! If possible, test ride your vehicle before buying so you know if they fit properly and feel comfortable.
Run a vacuum cleaner over the floor
The next step in cleaning your vehicle is running a vacuum hose through each row of seats to suck out any leftover food or water. Make sure you pull hard enough so that you remove all of the dirt, grease, and moisture!
After this, run an air dryer across the surface to get rid of excess dust. Once done, wash the car as normal. If you are still seeing signs of soil after washing the car, try wiping down the seat with glass-cleaning solution or use a new piece of cloth to repeat the process.
Fluff up the seat cushions
After you fluff up the cushion of your vehicle’s front passenger seat, do the same thing for the back one! This will give your passengers some extra padding so they feel more comfortable while sitting down.
For those who like to fold their legs when riding as a normal habit, this will help prevent uncomfortable cramping or knee pain. For car owners that enjoy laying down with the top off, this can also aid in relaxing the body.
Check and replace the air filters
One of the first things you should do in any car cleaning is check and replace the vehicle’s air filter. If you notice that your engine performance has diminished or it takes longer for the engine to warm up, then there may be an issue with the air filter.
A dirty air filter can cause your engine to work harder than it needs to, which will eventually hurt its performance. In fact, if you are having issues getting the engine to turn over, then it is very likely that there is a bad air filter.
When replacing the air filter, make sure you use a good quality tool. You don’t want one that is too big of a diameter, as this could poke holes in the filter and allow dirt to enter. An easy way to tell if the filter is old is to pull off a bit of dust and see how thick it is. A thinner layer of filth means it is newer so keep looking until there is no more gooey material left.
Another important thing to note is whether the synthetic or cotton version of the air filter is used in your vehicle. A synthetic air filter will last much longer than a cotton one, but they cost slightly more.
Give the engine a good wash
While you’re washing your vehicle, it is important to take care of the engine. Make sure to check out all areas of the engine thoroughly!
Some things that can be done while cleaning the car are wiping down the engine hood, the oil pan, the gaskets, and the valves. If needed, use some engine cleaner or grease removal products to make these area more comfortable to touch or remove excess dirt.
Make sure to clean any parts that go in between the hood and the body of the car. This includes the windshield washer bottle, the dipstick for the engine, and anything else that needs to be seen before going into the next step.
Never forget to give the air filter a quick wash as well! When drying it off, try using a paper towel or cloth to keep it from getting stuck and dirty again.
Wipe down the exterior surfaces
The next thing you’ll want to do is wipe down the vehicle’s external surface areas such as the hood, roof, windshield, windows, and body panels. Make sure to wash all of these with proper cleaning agents!
While it may seem tedious to take your time washing every part of your car, this is actually one of the most important steps in ensuring the safety of your vehicle. Due to how protective the skin of the vehicle is, dried dirt can act as an additional barrier when water tries to penetrate the porous material. This cuts off some of the moisture that makes its way into the interior of the car, which could cause damage or corrosion.
Since cars are manufactured with certain materials that are easily accessible, they often get cleaned first before internal parts like seats, engines, and transmissions. By giving the whole vehicle a good scrubbing at the same time, we can make sure everything gets properly taken care of.
Remember, never use alcohol-based cleaners on painted metal surfaces or plastic ones because these will remove the paint or harden the plastic.
Do a quick dry-down
The next step in cleaning your vehicle is doing a quick dry down! This includes wiping off any moisture such as when you wash the car or pull out of driveways.
Next, make sure all of your windows are wiped clean and that there are no streaks anywhere on the glass or film of water left behind. If there is some wetness remaining, wipe it away with a microfiber cloth or piece of cotton cloth until it is completely dried!
After this, take your time to do a thorough inspection under the hood and check the windshield for any road debris or fuzz!
Once everything looks good, give the engine a few minutes to cool down before washing it again. When washing the engine, remember to use only lukewarm (not hot) soap and soft brushes. Make sure to work in small areas at a time so that you don’t overwork the engine!
Finally, after cleansing both the exterior and interior of the vehicle, let the air dry thoroughly! Avoid pulling the doors open too soon as they may stick due to excess liquid.